Heat Presses
Ramco Computer & Supplies
110 North Kennedy Dr.
Bradley, IL 60915
Tel: (815) 937-0571
Hours 9:00am to 6:00pm Mon-Fri, Sat 9:00 to Noon -  Central Time

Click Here For Online Order Form

Return to Home Page @ www.ramcoweb.com


JP12

JetPress 12
JP12 JP12

Features



JP14

JetPress 14
JP14 JP14

Features


DK3

Digital Mug Press

The DK3 Digital Mug Press is a specialty press in Digital Knight line of presses exclusively for pressing mugs. This press is a full wrap-around, handle to handle, top-to-bottom printing mug press. It can press images up to 5" high, and as close as 1/2" from the handle, depending on the mug size.

The DK3 is fully adjustable, accommodating all mugs available on the market. This includes 11 oz, 15 oz, 16 oz mugs, steins and stainless steel travel mugs. The ability of the press to open extra wide allows for easy and fast loading and unloading of mugs from the press. The thick solid steel framework and die-cast clamp assembly provides a heavy duty framework for non-stop use. The clamp assembly can be adjusted for very heavy pressure, allowing for full bleed transfers on even the most demanding mugs. Finally - a mug press that compensates for less than perfectly straight mugs!

As with all Digital Knight presses, the DK3 utilizes a state-of-the-art digital control system with an unprecedented 3-year warranty on the heat-control electronics. With digital temperature, time and programmable presets, cycle counter and many other features, the consistency and productivity of mug printing is maximized.

At the heart of the DK3 is the SuperCoil-Microwinding™ heater technology, a system of embedded heater windings that wind tightly and closely together throughout the entire platen for extremely even heat, fast recovery & fast heat up times. The DK3 will start up in only a few minutes, and unlike other presses runs constantly at the set temperature, instead of a much lower idle temperature. Unlike other mug presses that use silicone blankets with short lifespans and even shorter warranties, the DK3 boasts an amazing 3-Year / 3,000 mug warranty. The patented stainless steel mug band heater technology Geo Knight is famous for has proven to be far more reliable in the field than traditional methods.

For the absolute best, at an amazing price, there is no better solution for pressing mugs than the DK3 Digital Knight Mug Press.

Features


DK20S

16x20 Digital Swinger

The Digital Knight DK20S is a 16x20 swing-away heat transfer press. The DK20S combines a heavy-duty solid steel industrial grade pressing framework with accurate and easy to use electronics to provide the operator with the best possible features and equipment needed for today's various heat transfer applications.

This press is our most popular 16x20 machine. It is well known in the industry as the top-end robust workhorse of all swing away heat presses. There is also a Jumbo sized 20x25 heat platen version of this press, the DK20JS. This press is also available in an air-operated automatic version, the DK20SP.

Features

 

DKA-TWIN

DK Twin Shuttle Attachment

The Digital Knight Twin Shuttle Upgrade is a dual station Add-On for the DK20S swing away heat press

Everyone knows that long term costs are not in the press equipment but in Labor Costs. Adding a twin shuttle removes wasted operator time waiting for a pressing cycle to finish. It also negates heat platen idle time while waiting for the operator to load and unload. Production is maximized with no additional labor cost.

The shuttle table creates less fatigue than swinging the head as well. Unlike easily tearable teflon 'hammocks', this shuttle is solid machined-flat aluminum, holding any heavy, sharp, and rigid imprintable products without concern. Laying out fabric, shirts and garments is a breeze, with the two 16x20 silicone pads positioned just like the standard table configuration on the press.

For almost double the productivity per single operator, the Digital Knight Twin Shuttle Upgrade is an unbeatable value.


DKA-STAND

DK Universal Stand

The Digital Knight Universal Stand is an extremely heavy-duty solid steel stand for the following Digital Knight heat press machines: DK20S, DK20SP, DC16, DC16AP, DK20, DK16

It features a heavy steel welded framework, and industrial grade casters. The rolling casters can be locked with the foot pedals, preventing wheel pivoting and movement of the stand.

The stand is quickly & easily assembled, and ships inexpensively by UPS. An excellent add-on for existing machines or new press purchases, all hardware & instructions are included for assembly.

 

DK20JS

Jumbo Digital Swinger

Features

 

DK20SP

Digital Knight Air Operated Swinger

The DK20SP is an air-operated automatic table top swing-away heat transfer press. The DK20SP provides a production oriented heat press with the benefits of push button operation, fully digital temperature & time control, and solid casting design with an affordable automatic heat press price. It is available in a 16" x 20" heater block size.

The DK20SP utilizes the same Digital Knight control system as the as the DK20S series, and operates with a smooth swing-away fashion instead of shuttling. For demanding press runs and super consistent results, the DK20SP is an ideal press for meeting requirements that go beyond what a manual transfer press and operator can handle. The DK20SP is the industrial grade midrange solution between heavy duty manual heat presses such as the DK20 and DK20S and high production 394 Factory Shuttle Press machines.


DC16

Digital Combo 14x16

The Digital Combo multipurpose swing-away heat press comes standard with a 14"x16" heat platen and lower table. (12"x14" or 6"x 8" available on request).

The interchangeability of the Digital Combo is performed quickly and safely. If your product offering is going to reach beyond just flat & fabric items, the Digital Combo is the superior heat press machinery solution.

The Digital Combo utilizes quick-change attachments for heat transferring images onto a surprisingly wide variety of materials. Available for this one press is every attachment necessary to professionally imprint:

T-shirts, tote bags, wooden plaques, coated metals, mouse pads, wrist pads, miscellaneous material and notably anything that is too bulky for the conventional flat press is effortlessly printed on the Digital Combo Press. Its raised pedestal bottom table using the 14" x 16" standard flat heat platens available provides drape space, adjustable alignment and base interchangeability for even the most demanding of applications.


DC16AP

14" x 16" Automatic Digital Combo

The Digital Combo DC16SP is an air-operated, automatic 14x16 swing-away heat press with optional interchangeable heat platens and tables. The smooth automatic pressing and pushbutton activation provides a productive, fatigue-free operation.

For all the same features and possibilities as the Manual DC16, with fully automatic air operated acton, the DC16AP is the ideal solution.

Features


DK20

Digital Knight 16x20 Clamshell

Our largest clamshell, the 16x20 DK20 opens for full access to the lower bottom table. It is important to note that the back of the heat platen raises above and away the bottom table, providing better access than other clamshell presses. The frame support allows operators to slide shirts over the table with complete drape space around and underneath the loading area. Interchangeable bottom tables for smaller pressing areas are available. This press is idea for environments with space limitations, and for users who need more portability and mobility than the over-weight swingaway presses.

The DK20 can be easily upgraded to an automatic release press with the "Pop-Up" upgrade. This allows for faster semi-automatic garment production at a very reasonable price. Add to this the twin station upgrade as well, and you have the ultimate clamshell dual station light production machine.

DK20

Features

DK16

Digital Knight 14x16 Clamshell

Our mid-sized clamshell, the 14x16 DK16 opens for full access to the lower bottom table. This press is the lowest cost solution for a business grade heavy-duty Digital heat press machine. It is important to note that the back of the heat platen raises above and away the bottom table, providing better access than other clamshell presses. The frame support allows operators to slide shirts over the table with complete drape space around and underneath the loading area. Interchangeable bottom tables for smaller pressing areas are available. This press is idea for environments with space limitations, and for users who need more portability and mobility than the over-weight swingaway presses.

The DK16 can be easily upgraded to an automatic release press with the "Pop-Up" upgrade. This allows for faster semi-automatic garment production at a very reasonable price.

DK16

Features


DK8

Digital Knight 6x8 Label Press

The DK8 label press is a 6x8 small platen heat press. This machine is very popular for label printing and small transfer & applique sealing.

If your image area is less than 8 inches, and you need to specifically isolate an area of a garment or bag, the tall pedestal on the DK8 allows for precise location of just the area needed to be pressed. Pockets, collars, socks, sleeves and similar areas are easy to press without flattening parts of the garment that should not be pressed. This saves the user from pressing very large areas of bulky items unnecessarily, as would happen on a standard T-Shirt press. The included interchangeable tables allow for isolation of the pressing area down to a mere 3x3 inches.

Features


DK8T

Digital Knight 6x8 Twin Label Press

The DK8T Twin label press is a 6x8 small platen heat press with a high productivity design. The head pivots back and forth between the two pedestals effortlessly. While one side is pressing, the user is able to set up work on the other pedestal and maximize efficiency.

This machine is very popular for label printing and small transfer & applique sealing. If your image area is less than 8 inches, and you need to specifically isolate an area of a garment or bag, the tall pedestal on the DK8 allows for precise location of just the area needed to be pressed. Pockets, collars, socks, sleeves and similar areas are easy to press without flattening parts of the garment that should not be pressed. This saves the user from pressing very large areas of bulky items unnecessarily, as would happen on a standard T-Shirt press. The included interchangeable tables allow for isolation of the pressing area down to a mere 3x3 inches.

Features


DK7

Digital Knight 4x7 Cap Press

The DK7 Cap press is a fully functional cap press for printing the front face of any sized headwear.

The DK7 has a unique hold-down device that pulls the rear strap of the headwear down against the pressing surface, holding the cap in place. The DK7 accepts different sized interchangeable tables (standard size included - see additional accessories below) for accommodating youth & chld sized caps, fitted and low profile caps, and many other items.

Features


DK7T

Digital Knight 4x7 Twin Cap Press

The DK7T Twin cap press is a fully functional cap press with a high productivity design. The head pivots back and forth between the two pedestals effortlessly. While one side is pressing, the user is able to set up work on the other pedestal and maximize efficiency.

The DK7T has a unique hold-down device that pulls the rear strap of the headwear down against the pressing surface, holding the cap in place. The DK7T accepts different sized interchangeable tables (standard size included - see additional accessories below) for accommodating youth & chld sized caps, fitted and low profile caps, and many other items.

Features

 

DC16AP

14" x 16" Automatic Digital Combo

The Digital Combo DC16SP is an air-operated, automatic 14x16 swing-away heat press with optional interchangeable heat platens and tables. The smooth automatic pressing and pushbutton activation provides a productive, fatigue-free operation.

For all the same features and possibilities as the Manual DC16, with fully automatic air operated acton, the DC16AP is the ideal solution.

Features


DK20SP

Digital Knight Air Operated Swinger

The DK20SP is an air-operated automatic table top swing-away heat transfer press. The DK20SP provides a production oriented heat press with the benefits of push button operation, fully digital temperature & time control, and solid casting design with an affordable automatic heat press price. It is available in a 16" x 20" heater block size.

The DK20SP utilizes the same Digital Knight control system as the as the DK20S series, and operates with a smooth swing-away fashion instead of shuttling. For demanding press runs and super consistent results, the DK20SP is an ideal press for meeting requirements that go beyond what a manual transfer press and operator can handle. The DK20SP is the industrial grade midrange solution between heavy duty manual heat presses such as the DK20 and DK20S and high production 394 Factory Shuttle Press machines.

 

394-TS

Air Operated Shuttle Press

The 394 Shuttle Press is a high production, twin station heat transfer press. It is available in two different heater block sizes: 16" x 20" and an oversized 20" x 25". Designed for optimal pressing efficiency in a demanding heat transfer production environment, the 394 Shuttle Press removes operator inefficiency and pressing delays in a compact and user-friendly design. By utilizing two shuttling tables, the press allows for constant pressing, and the operator is able to load and unload work while the opposite table is being pressed. The next set of work is immediately available for pressing after the prior cycle, therefore minimizing both operator and press idle time.

Coupled with the Digital Knight state-of-the-art control system, and a solid steel and casting frame structure, the 394 provides extended dependable service in even the most demanding production environments. The 394 exerts up to 12,000 pounds of force, the capacity necessary for Embossing. The high wattage heater in the 394 will keep up with any heat demand, ensuring absolutely no heat recovery issues often found with standard presses. The 394 is configured for standard T-shirt & textile printing, and is easily adapted for other substrates such as ceramics, woods, metals, mousepads and fusing & laminating applications.

394-TS

Features



MAXI•PRESS

 

The MAXI•PRESS is a multipurpose large format manual heat transfer press intended for the imprinting of a vast range of different materials. The MAXI•PRESS provides an oversized platen, production oriented press with the option of a single loading table or twin shuttle table configuration. It is available in two different heater block sizes: 30" x 40" and 40" x 64". The gas shock counter springs provide a weightless and effortless operation of the press. The Digital Knight state-of-the-art control systemaccurately regulates all aspects of the electrical functions of the press, freeing the operator for the main goal of material imprinting.

Ideal applications the MAXI•PRESS has performed flawlessly include: large fabrics, multiple piece goods, banners, floor mats, carpets, mouse pads, plastics, sheet metal, tile & other ceramics and much more. The MAXI•PRESS strongly supports sublimation transfer processes, as well as digitally produced transfers, hot and cold peel plastisol transfers, and laminating processes.

MAXI•PRESS

The Maxi•Press models are priced simply by heater block size. The list below notes the most common sizes and their respective pricing.

 

30" x 40" $ 7,650.00
30" x 40" w/ bottom heat $ 10,525.00
40" x 64" $ 13,025.00
40" x 64" w/ bottom heat $ 17,675.00

For the high production twin shuttle table configuration, add 2,625.00 (30" x 40" ) or 3,650.00 (40" x 64")

Features



931
Triton

The 931 TRITON presses are air operated automatic large format twin station shuttle presses that range in platen sizes up to 4 feet by 8 feet standard, and 8 feet by 12 feet custom!

The 931 TRITON is a large format pneumatic heat transfer press built for pressing a wide variety of materials. It is geared towards high-production pressing of multiple piece goods as well as 4" x 8" sheet materials.

The 931 TRITON answers the demand for a more stable, solid work base along with the capability of pressing transfers in an oversized large-area environment. Typical applications include heat transfer printing onto fabrics such as banners & garments, thicker materials such as carpets & mats, rigid goods like tiles & ceramics, as well as woods, sheet metal, plastics, polyester coated synthetics and a vast range of other substrates. Typical processes used are sublimation printing, hot splits, foiling, embossing, laminating, hot-stamping, heat sealing and other applications requiring a massive size heat transfer press.

Industrial Air Bag Pneumatics provide many times heavier pressing force than cylinders. They are also selfleveling and 100% maintenance free.

Photo Eye safety circuitry provides safety protection around the heat platen.

Redundant Micro Switches confirm location of loading tables before beginning pressing cycle.

High-Strength Roller Cams & smooth computer controlled indexing allow the loading tables to quietly & gently bring the work in and out of the pressing area.

High Wattage Fire Rod Heaters are embedded deep in the core of the extra thick 2" aluminum heat platen. The platen is gun-barrel drilled and heaters are placed in close proximity along the entire length of the heat platen for the most even heat possible over the entire heat platen surface.

For a full color brochure, and to see a video demonstration and video walk-through of the 931 Triton, please use the links below.

931 931 931 931

Available in Twin Station or Single Station loading table configurations. (Twin station automatic 54x103 shown)

Smaller sizes are available without automatic table indexing. (Operator Manually shuttles loading table)

 

 

 



Web Author: Andrew